Buy Laboratory Supplies in the UK | Research Tools & Accessories at Imperial Peptides UK

Disclaimer

By purchasing from Imperial Peptides UK, you acknowledge and agree to the following terms:

Research Use Only (RUO)

All products supplied by Imperial Peptides UK are classified strictly as Research Use Only (RUO) materials. They are not intended for human consumption, human or animal administration, medical, therapeutic, or clinical use, diagnostic or veterinary procedures, cosmetic or wellness applications, or any in vivo use under any circumstances. Products must only be used in controlled laboratory research settings by individuals competent in the safe handling of research chemicals.

Not Medicines or Medical Devices

None of our products should be regarded, described, marketed, repackaged, supplied, or used as medicines, medical devices, injectables, treatments, or food supplements under UK law. Imperial Peptides UK does not supply products for therapeutic, clinical, or diagnostic purposes.

Buyer Responsibility & Compliance

The purchaser is solely responsible for ensuring the lawful use of all products, for their safe handling, storage, and disposal, and for compliance with all relevant UK regulations, including COSHH and applicable laboratory safety standards. The purchaser is also responsible for verifying that each product is suitable for their intended research application. Imperial Peptides UK assumes no liability for misuse, improper handling, unsafe storage, unlawful use, or any outcome resulting from applications beyond RUO scope.

No Returns Policy

Due to the specialist and perishable nature of research materials, and in accordance with UK consumer law exemptions for bespoke or sensitive goods, we do not accept returns once a product has been dispatched. Refunds are only available in cases of damage, incorrect supply, or quality issues, as outlined in our Refunds & Returns Policy.

UK-Based Customers

By placing an order, you confirm that you are a UK-based purchaser, that you are buying strictly for in-vitro laboratory research use, and that you have read and fully accept this disclaimer and our Terms & Conditions. Imperial Peptides UK reserves the right to refuse orders that do not meet our compliance requirements.

Frequently Asked

Yes. Research peptides can be purchased legally in the UK for laboratory research purposes only. At Imperial Peptides UK, all products are clearly labelled “For Research Use Only – Not for Human Consumption”, in line with MHRA guidelines.

Research peptides are small chains of amino acids, the building blocks of proteins. Scientists join amino acids together using a special link called a peptide bond. By changing the order of amino acids, researchers can create peptides with different properties to study in the lab.

How are peptides made in the lab?

Most peptides are made using a method called solid-phase peptide synthesis (SPPS). In simple terms:

The first amino acid is fixed onto a solid support (like a bead).
Other amino acids are added one at a time in the right order.
Special protective steps stop the wrong parts of the amino acids from reacting.
At the end, the finished peptide is released and cleaned.

This step-by-step method allows scientists to create high-purity peptides for experiments.

⚠️ Important note:

These products are supplied for laboratory research only. They are not medicines and must not be used by humans or animals.

Because we believe trustworthy research starts with trustworthy suppliers. That’s why Imperial Peptides exists — to give researchers confidence through quality, transparency, and compliance. We provide high-purity, research-use-only peptides with Certificates of Analysis, secure UK-based operations, and fast delivery, so you can focus on advancing discoveries without uncertainty.

All our peptides contain trace amounts of mannitol, a common excipient used to improve stability, solubility, and handling. It protects the peptide during freeze-drying and storage, helps it dissolve more easily when reconstituted, and ensures the vial is not visually empty despite the small peptide quantity.

All orders are dispatched the next working day. We use Royal Mail Tracked 24 for all shipments to ensure full end-to-end tracking and improved reliability.

Royal Mail Tracked 24 → usually delivered the next working day
(Estimated by Royal Mail)

You’ll receive a tracking number as soon as your order is dispatched.

⚠️ Please note: delivery times are Royal Mail estimates and may vary during busy periods.

Our peptides are produced by experienced international manufacturing partners using solid-phase peptide synthesis (SPPS).

To ensure quality and consistency, every batch is:

Independently tested by HPLC
Supplied with a full Certificate of Analysis (CoA)
Clearly batch labelled for traceability
Subject to final inspection and quality checks in the UK before release to customers

By focusing on independent testing and verification, we ensure that researchers receive high-purity, reliable peptides for their work.

⚠️ Note: All products are supplied strictly for laboratory research use only (RUO). Not for human or veterinary use.

Quick Guide (Research Use Only):

Handling

Let vials warm to room temperature before opening (prevents moisture).
Work in a clean environment and only take what you need.

Storage

Keep lyophilised peptides at –20°C or lower, in sealed containers with desiccant.
Protect from moisture, heat, and light.
Avoid repeat freeze–thaw cycles.

Reconstitution

Less stable than freeze-dried form.
Store in refrigeration (2–8°C) for short-term use.

⚠️ Important: For laboratory research only. Not for human or veterinary use.

We do not offer blended peptides (e.g. combinations such as Ipamorelin with CJC-1295 / Mod GRF).

There are several reasons for this:

Scientific accuracy – Blends often use fixed ratios that may not be appropriate for most research applications.
Dosing clarity – When peptides are combined in one vial, the exact microgram content of each component cannot be measured accurately, which may compromise results.
Research flexibility – Purchasing peptides separately allows you to control the precise amount of each peptide you use. For example, you can combine 100 mcg of Peptide A with 100 mcg of Peptide B in the same experiment, ensuring accuracy and reproducibility.
Cost considerations – Blends are not necessarily cheaper. Buying peptides individually usually provides better value and reliability.

Our recommendation: Acquire peptides separately. This ensures your research remains accurate, reliable, and scientifically valid.

⚠️ Important: All products are sold for laboratory research use only. Not for human or veterinary use.

Yes. Each peptide batch is accompanied by a Certificate of Analysis (HPLC), so researchers can verify quality

Our peptides are typically supplied at ≥99% purity (HPLC tested). Specific purity values are provided on the CoA for each batch.

Each peptide vial is clearly labelled for traceability and quality control.

The Batch Number is shown as a combination of the SKU code + expiry date.
Example: BPC10-03/27 → where BPC10 is the SKU and 03/27 indicates the expiry date (March 2027).
This batch number links directly to the Certificate of Analysis (CoA) for your vial.

Always quote the batch number when contacting us about quality, testing, or product enquiries.

⚠️ Important: All products are supplied strictly for laboratory research use only.

A peptide reconstitution calculator is a simple tool used to work out diluent volumes and peptide concentrations. Our free online UK peptide calculator makes it easy to calculate reconstitution volumes and dose measurements for laboratory use.

Who can use this calculator?

This calculator is designed for researchers, labs, and life sciences professionals in the UK and internationally. It is strictly intended for Research Use Only (RUO) and not for human or veterinary consumption.

What units does the calculator support?

The tool supports milligrams (mg), micrograms (mcg), and millilitres (mL). It also works with standard syringe scales, including U-100 and U-50 insulin syringes, making it a versatile peptide reconstitution calculator for lab protocols.

Can I use this calculator for IU conversions?

Yes. If your peptide has a known IU per mg conversion factor, you can enter it to calculate IU per dose and per unit. This feature makes it easier to handle reconstitution calculations for certain research peptides.

Is this calculator suitable for medical dosing?

No. This tool is provided purely as a research calculator. It is not designed for medical dosing and must not be used for human or veterinary applications.

A peptide mixing solution is a sterile diluent used to reconstitute lyophilised peptides into liquid form for laboratory research.

Is this solution sterile?

Yes. Our peptide mixing solution is supplied sterile to ensure reliable reconstitution and accurate results in research settings.

Can this be used for human or veterinary applications?

No. This solution is strictly for Research Use Only (RUO) and is not intended for human or veterinary use.

What volume options are available?

The solution is supplied in convenient volumes suitable for accurate peptide preparation in laboratory workflows.

How quickly can I receive my order in the UK?

We offer fast UK delivery so researchers can access peptide mixing solutions without delay.

Yes. Retatrutide is now listed and supported via our parent platform, www.imperialsciences.co.uk. Imperial Peptides UK is a brand of Imperial Sciences, and selected research compounds are managed through the parent site to improve platform stability and documentation.

Yes. Imperial Sciences is the parent company of Imperial Peptides UK. Imperial Peptides UK continues to operate as a brand, while Imperial Sciences provides expanded research infrastructure and listings.

Review us on

★★★★★

Rated Excellent By UK Researchers

“Wow! I’m very impressed with the service...”

— E W

“Great experience, super quick and speedy...”

— Customer

“Fantastic service, very quick”

— Charlene

“My new ‘go to’ supplier...”

— Glenn

“5 stars all day long...”

— George

Lab Supplies

Storage Container